mode : Revere Ware Pan/skillet 1-screw Handle Replacement Hardware Set
Feature: Revere Ware Pan/skillet 1-screw Handle Replacement Hardware Set
- This hardware is for the single screw type Revere Ware pans. These have a screw going through the metal part of the handle.
- THIS HARDWARE WILL NOT WORK ON THE 2-SCREW TYPE REVERE WARE HANDLES
- Includes two separate hardware sets, enough for two separate pans.
|
Revere Ware Pan/skillet 1-screw Handle Replacement Hardware Set Reviews
| 2 of 2 people found the following review helpful  The handle was great, came with 1 long and 1 short screw, Verified Purchase This review is from: Revere Ware Pan/skillet 1-screw Handle Replacement Hardware Set No. I needed the longer screws. The order form did not specify long or short, so I still need two of the longer screws. The handle was great, came with 1 long and 1 short screw. 1 of 1 people found the following review helpful Check seller's site first, By Verified Purchase This review is from: Revere Ware Pan/skillet 1-screw Handle Replacement Hardware Set BEFORE ordering, check the Reverewareparts.com site for additional ordering cautions on one-screw vs two-screw details. Reverwareparts provides complete detail so you'll select the right part. The Amazon product description did not, causing me to order the wrong part the first time. Had I checked the Reverewareparts site, I could have ordered correctly the first time. 1 of 1 people found the following review helpful  Beware, may not work for all handles!, By Gretchen CLS (Danville, CA USA) - See all my reviews This review is from: Revere Ware Pan/skillet 1-screw Handle Replacement Hardware Set Be very careful if purchasing this to fix a Revere Ware handle! The parts were not long enough to work for the handle of my pan. Maybe the Revere Ware made the handles thinner than the age of my pan, but the screw couldn't reach through to grasp the nut portion. I don't recall if the description gave a length. It's cost is not worth the time to return it. |
› See all 10 customer reviews...
Product Description
These are replacement screws, nuts, and washers for newer era (single screw type) Revere Ware pan handles. THIS HARDWARE WILL NOT WORK ON THE 2-SCREW TYPE HANDLES AS THE SCREWS AND NUTS ARE TOO SHORT. These parts are newly manufactured and are made to look and work just like original Revere Ware hardware, with the exceptions noted below.
This includes TWO HARDWARE SETS, enough for two separate pans.
Material: Stainless steel
Includes: Two sets of: one screw, one barrel nut, one lock washer; enough for two separate pans.
Measurements: Screws are .26 inches (7 mm) long including head. Barrel nuts are .3 inches (8 mm) long including head.
Fits: Newer era small pan handles. These fit post-1968 era Revere Ware pans with handles that have one screw through the metal part sticking out of the pan metal part of the handle.
These screws will only work with the single screw newer style handle. These screws and nuts will not fit in the older two-screw handles.
Replaces: The original Revere part number for this screw set was 36080.
Hardware Notes
The screws in the hardware set are Phillips head, not slotted like original Revere Ware screw sets were. Because the original slot head screws strip very easily, we consider this an improvement. These are intended for use with new replacement handles or to fix pans whose handles have a loose rivet or a damaged hardware set.
Installation Notes
The single-screw handles these are intended for most often are secured to the pot with a rivet. Some effort is required to remove the rivet to replace it with this hardware. The easiest way to remove the old rivets is to drill them out with a 5/32 drill bit. Note that we are selling these in pairs of two sets, to help reduce the shipping cost per single item.
No comments:
Post a Comment